| Code | Description | Box Qty | Applicable Min-Max Cable Ties Widht (mm) | Colour |
|---|---|---|---|---|
| 8504 | CABLE TIE TOOL | 10 | 2,2 - 4,8 | Blue |
| 8513 | CABLE TIE TOOL | 10 | 2,2 - 4,8 | Red |
| 8523 | CABLE TIE TOOL | 10 | 0 - 9,5 | Red |
| 8534 | CABLE TIE TOOL | 10 | 2,5 - 4,8 | Blue |
| 8543 | CABLE TIE TOOL | 10 | 2,5 - 10,6 | Red |
Cable Tie Installation Tools – Manual and Automatic Tensioning Pliers
Cable Tie Installation Tools – Manual and Automatic Tensioning Pliers
Art. 8504: Automatic tool to clamp cable ties, made of a special resin with fiberglass, mechanical parts in steel. It permits to clamp and cut the cable ties with one move, setting the clamping stress. It can install cable ties from 2,2 mm to 4,8 mm width. The tool must be set according to the size of the cable tie.
Art. 8513: Automatic tool to clamp cable ties, made of painted steel. It permits to clamp and cut the cable ties with one move, setting the clamping stress.
It can install cable ties from 2,2 mm to 4,8 mm width. The tool must be set according to the size of the cable tie.
Art. 8523: Manual tool to clamp cable ties, ideal also for installation cable ties. Made of painted steel, it is easy to use. The cut is made by means of the specific trigger.
It can install cable ties up to 9,5 mm width.
Art. 8534 : Automatic tool to clamp cable ties, made of painted steel and plastic. The ergonomic shape avoids stressing the hand and makes it suitable for prolonged use. It permits to clamp and cut the cable ties with one move. The easy tension’s control knob makes the cut of the cable ties more precise. The cap of tension knob accommodates a screwdriver necessary to replace the blade. The spare blade is included in the tool body.
It can install cable ties from 2,5 mm to 4,8 mm width.
Art. 8543 : Automatic cutting tool to clamp cable ties, ideal also for installation cable ties. Made of painted steel it can install cable ties up to 10,6 mm width. The ergonomic shape avoids stressing the hand and makes it suitable for prolonged use. It permits to clmap and cut the cable ties width one move. The easy tension’s control knob makes the cut of the cable ties more precise.
Cobra Cable Ties® Installation Tools - Manual and Automatic Tensioning Pliers
Cobra Cable Ties® installation tools are precision-engineered tensioning and cut-off pliers for professional cable tie installation. Available in manual and automatic versions with adjustable tension settings. Applying correct and consistent tension prevents over-tightening of cable insulation, and speeds up high-volume wiring operations significantly.
Compatible with all Cobra® cable ties. B2B supply to electrical contractors, wiring harness assemblers, panel builders, and tool distributors across Europe.
Check the cable ties width you are applying to choose the correct tool model.
Cable Tie Installation Tools - Tensioning and Cut-Off Pliers for Professional Use
Manual cable tie installation is sufficient for low-volume or occasional use. For production-line harness assembly, panel building, or any high-volume wiring operation, Cobra® installation tools significantly reduce installation time. Some models eliminate the cut and tail-trimming step as part of the same installation operation.
Manual vs. Automatic Tools
Manual tensioning pliers:
Cod. 8523
The tool grips the cable tie tail, applies tension via a lever mechanism.
By using this dedicated installation tool, the final closure diameter can be precisely controlled without fully tightening the tie to its maximum tension. The integrated cutting lever allows the excess strap to be trimmed for a clean and professional finish.
Automatic tensioning pliers:
Cod. 8504, 8513, 8534 , 8543
Ergonomically designed for sustained high-volume use. Set the tension and proceed with installation. The tool repeats the same tension and cut-off cycle with each operation. Reduces hand fatigue in production environments and ensures consistent results across thousands of installations.
Why Use a Cable Tie Tool?
- Consistent tension: eliminates variation between individual installer hand-pull strength
- Flush cut-off: tail trimmed , no sharp protruding ends
- Speed: significantly faster than manual cable ties installations
Compatibility
Our installation tools are calibrated for use with Cobra® cable ties. The tension setting must be adjusted to match the specific cable tie size and tensile strength. Consult the tool datasheet or contact us for guidance on correct tension settings by tie size.
You may also like
-
View Product This product has multiple variants. The options may be chosen on the product page -
View Product This product has multiple variants. The options may be chosen on the product page
-
View Product This product has multiple variants. The options may be chosen on the product page
-
View Product This product has multiple variants. The options may be chosen on the product page
